Panasonic DP-3510 Service Manual page 364

(6)
(8)
(9)
(10)
Ver. 5.2
(1)
(3)
(7)
(9)
364
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
4. Preparing the Host Machine for Installation
(1) Loosen the 2 Screws and remove the SPC
Cover.
(2) Remove the Toner Waste Container.
(Refer to Section 2.2.2. the Service Manual)
(3) Install the Finisher IPC PC Board onto SPC PC
Board, Connector CN727.
(4) Reinstall the SPC Cover and Toner Waste
Container.
Note:
Gently and securely insert the IPC PC Board as
illustrated.
Note:
The following steps (5)~(15) are not applicable for
USA and Canada.
(5) Open the Front Door.
(6) Open the Upper Exit Cover.
(7) Remove 3 Screws.
(8) Remove the Exit Guide 3 Assembly.
(9) Remove 2 Screws.
(10) Remove the Exit Guide 1 Assembly.
JAN 2006