Panasonic DP-3510 Service Manual page 292

Main Unit Firmware Code Updating Instructions
1. Updating through a LAN Port (The Quickest and Most Easiest Method)
The firmware code can be easily updated when the main unit is connected to a LAN.
The Network Firmware Update Tool can also be used by connecting to the machine using a crossover
cable, if the unit is not connected to a LAN.
1) Install the Network Firmware Update Tool to your PC
The option CD-ROM or the Panasonic Document Management System CD-ROM includes the Network
Firmware Update Tool and the Main Unit Firmware Code are located in the Option CD-ROM only.
Please refer to the following Operating Instructions to install the Network Firmware Update Tool.
The installation password is "workio".
Operating Instructions:
\xFirmware\Tools\NwFirmup\NwFirmup OI.pdf (Refer to the
Setup:
\xFirmware\Tools\NwFirmup\Setup\Setup.exe
2) Preparing the Firmware Code
Double click the appropriate Destination Shortcut Batch File and copy the Firmware Code File on the
CD ROM to the Firmware Data Folder in your PC. Note that the files in the Archive will be extracted
automatically into the designated folder when the Archived file (.exe) is Double-clicked.
Example:
From:
Destination Shortcut Batch File: D:(CD-ROM Drive) \ xFirmware \ USA.bat
Firmware Code File:
To:
Firmware Data Folder:
3) Preparing the Main Unit for the Firmware Upgrade
Make sure the unit's Key Operator Password is the same as the tool's password.
Make sure the unit is in an idle state (e.g. not making copies, not printing, etc.).
4) Upgrading the Main Unit's Firmware Code
Start the Network Firmware Update Tool and select the following Firmware Code Folders in the
C:\Program Files\Panasonic\Panasonic-FUP\Data folder, and then follow the display instructions to
upgrade the Main Unit's Firmware Codes.
Parent Firmware File Folder
\ DP-3530_4530_6030_xx_xxxxxx
Ver. 5.2
DP-3530_4530_6030_xx_xxxxxx.exe
C:\ Panasonic \ Panasonic-FUP \ Data
\ PNL \ M25R_PNLAxVxxxxxx-xx
\ SC_STD \ SFD_M25RAxVxxxxx-xx
\ SC_PCL \ SFD_M25RBxVxxxxx-xx
\ SC_PS \ SFD_M25RDxVxxxxx-xx
\ SPC \ SFDM_SPCAAV4xxxxx
When you select the Parent Folder, the
following Firmware Type window
appears. Proper Sub File Folders are
selected automatically by selecting the
Firmware Type.
The transferring order is set up
automatically.
292
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
NW Firmware Update Tool OI
Sub Firmware File Folder
on the CD)
JAN 2006