Installing The Printer Controller Module For Ps / Pcl6-Ipx/Spx (Da-Mc601) - Panasonic DP-3510 Service Manual

8.9. Installing the Printer Controller Module for PS / PCL6-IPX/SPX
(DA-MC601)
8.9.1. Contents
Qty.
1 Hardware Key
Software CD
1
1 Adobe Postscript 3 Label
1
License Agreement
1
1 License Agreement
(For Adobe PostScript Driver)
1
1 Installation Instructions
Note:
1. The part number may differ depending on the Destination.
2. Refer to the Parts List in the Parts Manual.
8.9.2. Installation
1. Before installing this option, make sure the Program Expansion Board (DA-EM600) is installed
into Slot 1 on the SC PC Board first. Refer to the Installation Instruction of the Program
Expansion Board (DA-EM600).
2. Install the Hardware Key by following the steps below.
CAUTION!
Turn the Power Switch on the Left Side and the Main Power Switch on the Back of the
machine to the OFF position, and then unplug the AC Power Cord before beginning
installation.
(2)
Ver. 5.2
Description
(1)
(1)
Main
Power
SW
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
Part No.
----- PS KEY
DZRQ000292 or
Includes Operating Instructions
DZRQ000293
DZNK004647
DZSH000112 For USA and Canada only
DZSH000113 For Other Destinations
----- For USA and Canada only
----- For Other Destinations
DZSM000753 This document
(1) Loosen 5 Screws.
(2) Remove the Rear Plate as illustrated.
312
Remarks
JAN 2006