Panasonic DP-3510 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Software
  5. Workio DP-3510
  6. Operating instructions manual

Panasonic DP-3510 Operating Instructions Manual

For panasonic printing system postscript3
Hide thumbs Also See for DP-3510:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Handbook, Operating Instructions Manual
Software

Operating Instructions

(For Panasonic Printing System PostScript3)
DP-3510/4510/6010
Model No.
Before operating this software, please read these instructions completely and keep these operating instructions for future reference.
English

Advertisement

Table of Contents
loading

Related Manuals for Panasonic DP-3510

Summary of Contents for Panasonic DP-3510

  • Page 1: Operating Instructions

    Software Operating Instructions (For Panasonic Printing System PostScript3) DP-3510/4510/6010 Model No. Before operating this software, please read these instructions completely and keep these operating instructions for future reference. English...
  • Page 2 The following trademarks and registered trademarks are used throughout this manual: Microsoft, MS-DOS, Windows and Windows NT are registered trademarks of Microsoft Corporation in the USA and other countries. i386, i486 and Pentium are trademarks of Intel Corporation. Centronics is a registered trademark of Centronics Data Computer Corporation. TrueType is a registered trademark of Apple Computer, Inc.

  • Page 3: Table Of Contents

    Table of Contents Before Use Precautions ........................For Users in the USA ..................Printer Section Installing the Printer Driver ................... Windows 98/Me/NT/2000/XP ................. Mac OS 8.6/9.x....................10 Mac OS X ....................... 14 Installing the LPR (Line Printer Remote) Monitor / Service / Port ......16 Windows 98/Me....................

  • Page 4: Before Use

    Before Use Precautions For Users in the USA This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

  • Page 5: Printer Section

    Printer Section Installing the Printer Driver Windows 98/Me/NT/2000/XP Exit from all applications, then insert the Panasonic Printing System CD into the CD-ROM drive. Select the desired language. The setup message will appear. Click the button. Next Click Printer Driver (PostScript3).
  • Page 6 Installing the Printer Driver Windows 98/Me/NT/2000/XP Note for Windows 98/Me users: If your computer does not have the LPR Port Monitor installed, please proceed to "Installing the LPR Monitor" on page 16 before continuing this installation. Click Install Printer Driver (PostScript3). The setup wizard will start.
  • Page 7 Installing the Printer Driver Windows 98/Me/NT/2000/XP Select a printer port, normally LPT1 for local printers. Click the button. Next (See Note 2 on page 9) The Select Printer Model window appears. Click the button. Browse... Note: The Window will appear with Generic PostScript Printer highlighted.
  • Page 8 Installing the Printer Driver Windows 98/Me/NT/2000/XP Specify whether the printer will be shared with other network users. Click Shared and enter a shared name, or click Not Shared. Click the button. Next Note: This window does not appear in Windows 98/Me.
  • Page 9 Finish computer. The Panasonic PostScript Printer Driver has been installed, and the Panasonic Printer icon has been added to the Printer folder. 1. When installing on Windows NT 4.0 and Windows 2000/XP, logon to the computer/network NOTE using an account with administrator rights.

  • Page 10: Mac Os 8.6/9.X

    Installing the Printer Driver Mac OS 8.6/9.x Exit from all applications, then insert the Panasonic Printing System CD into the CD-ROM drive. Double-click the CD icon on the desktop. English > PS > Setup > Mac > ps_88_E > US.sea Please decompress US.sea with decompression...
  • Page 11 Installing the Printer Driver Mac OS 8.6/9.x A progress bar indicates that the printer driver is being installed. When the setup process is completed, a message is displayed prompting you to restart your computer. Click the button to restart your Restart computer.
  • Page 12 A PPD file for the desired printer must be present. Select your machine’s model ("Panasonic_DP- xxxx.PPD"), and click the button. Select Select the Panasonic_DP-3510_FS330.PPD file when your machine is a DP-3510, and is configured with a 2-Bin Finisher (DA-FS330). Click the button.
  • Page 13 Installing the Printer Driver Mac OS 8.6/9.x Confirm and/or change the installable options settings for your printer. Click the button. After the PPD file is copied, the driver creates a new desktop printer icon for your device.

  • Page 14: Mac Os X

    A list of available AppleTalk printers appears. Select your machine’s model ("Panasonic DP-xxxx"). Click on the Printer Model pull-down menu, and select "Panasonic_DP-xxxx.PPD". Select Panasonic_DP-3510_FS330.PPD when your machine is a DP-3510, and is configured with a 2- Bin Finisher (DA-FS330). The printer model selection window appears.
  • Page 15 Installing the Printer Driver Mac OS X Click the button. Your machine is added to the Printer List.

  • Page 16: Installing The Lpr (Line Printer Remote) Monitor / Service / Port

    Installing the LPR (Line Printer Remote) Monitor Windows 98/Me Insert the Panasonic Printing System CD-ROM. Select the desired language. Click the button. Next Click Printer Driver (PostScript3). Click Install LPR Monitor.
  • Page 17 Installing the LPR (Line Printer Remote) Monitor Windows 98/Me The Setup dialog box appears. Click the button. Next The setup program copies the necessary files onto the hard disk of your PC. When the setup process is completed, a message is displayed prompting you to restart your computer.
  • Page 18 Installing the LPR (Line Printer Remote) Monitor Windows 98/Me The printer properties dialog box appears. The following step registers the LPR Port for network printing. Before proceeding, ensure that the printer is installed, connected to the network, turned ON and is operating properly.
  • Page 19 Installing the LPR (Line Printer Remote) Monitor Windows 98/Me The Add Port dialog box appears. Click the Other radio button, select HLPRMON from "Click the type of port you want to add:" list and click the button. The LPR Port Name dialog box appears. Type the IP Address of the machine and "lp"...

  • Page 20: Windows Nt 4.0

    Installing the LPR (Line Printer Remote) Service Windows NT 4.0 Logon using an account with administrator rights. Click the Start button, select Settings, and click Control Panel. The Control Panel window appears. Double-click on the Network applet. The Network dialog box appears. Click on the Services tab.
  • Page 21 Installing the LPR (Line Printer Remote) Service Windows NT 4.0 Click the button to display the Select Add... Network Service dialog box, and select Microsoft TCP/IP Printing. Click the button. The Windows NT Setup dialog box appears. Insert the Windows NT 4.0 CD-ROM, and type D:\i386 (where "D:"...
  • Page 22 Installing the LPR (Line Printer Remote) Service Windows NT 4.0 After your computer has rebooted, log on with an account with Administrator Priviledges, click the Start button, select Settings, and then click Printers. The Printers folder appears. Right-click on the desired printer icon and select Properties from the pop-up menu.
  • Page 23 Installing the LPR (Line Printer Remote) Service Windows NT 4.0 The Add LPR compatible printer dialog box appears. Enter the IP Address of the printer in the upper field, and "lp" for the print queue name in the lower field. Click the button.

  • Page 24: Windows 2000/Xp

    Installing the LPR (Line Printer Remote) Port Windows 2000/XP Logon using an account with administrator rights. Open the Printers folder. Right-click on the desired printer icon and select Properties from the pop-up menu. The printer properties dialog box appears. Select the Ports Tab and click the Add Port...
  • Page 25 Installing the LPR (Line Printer Remote) Port Windows 2000/XP Click the button. Next Enter the IP Address and the Port Name and click button. Next Note: The Port Name is automatically entered by Windows 2000/XP. You may need to change it as required. Select Custom and click the button.
  • Page 26 Installing the LPR (Line Printer Remote) Port Windows 2000/XP 1. In the Protocol section, select LPR. 2. In the LPR Settings section, enter the Queue Name (e.g. LPR1) and select the LPR Byte Counting Enabled. 3. Click the button. Click the button.
  • Page 27 Installing the LPR (Line Printer Remote) Port Windows 2000/XP Click the button. Close Click the button. Apply Click the button. The printer properties dialog box closes and you have now configured the printer as a network printer.

  • Page 28: Installing The Ps Driver Security Utility

    To control the Charge Management with the Accounting Management application, it is essential that you setup the Utility settings first. Exit from all applications, then insert the Panasonic Printing System CD into the CD-ROM drive. Select the desired language.
  • Page 29 Installing the PS Driver Security Utility Windows 98/Me/NT/2000/XP Select Install PS Driver Security Utility. Click the button. Next Click the button if you want to place a shortcut to PS Security Utility on your desktop. The required files are copied.
  • Page 30 Installing the PS Driver Security Utility Windows 98/Me/NT/2000/XP Click the button. Finish The PS Driver Security Utility folder has been added to the Program menu, and the installation has now completed.

  • Page 31: Mac Os 8.6/9.X/X

    If you have already added the printer, delete it, change the setting using the PS Driver Security Utility, then add the printer. Exit from all applications, then insert the Panasonic Printing System CD into the CD-ROM drive. Double-click the CD icon on the desktop.

  • Page 32: Configuring The Printer Driver Settings

    Configuring the Printer Driver Settings Windows 98/Me To change the printer settings, open the printer properties by performing the following steps. Click the Start button, select Settings, and then click Printers. Right-click the desired printer icon in the Printers folder, and select Properties in the popup menu.
  • Page 33 Configuring the Printer Driver Settings Windows 98/Me General Tab 1. Comment Enter comments to the properties, if any. If another user sets up this printer on his or her computer when sharing the printer, the comment specified here will also appear on that computer. However, the comment displayed for an existing user will remain unchanged even if the comment is modified later.
  • Page 34 Configuring the Printer Driver Settings Windows 98/Me Details Tab 1. Print to the following port Displays either the port where the printer is connected or the path to the network printer. To change the printing destination, either select the printing destination port from the list or enter the network path here.
  • Page 35 Configuring the Printer Driver Settings Windows 98/Me 7. Timeout settings - Transmission retry Specify the amount of time (in seconds) allowed to elapse before the printer is ready for printing. If the printer is not ready for printing within this duration, an error message will be displayed. Increase this value if a timeout error occurs when printing a large document.
  • Page 36 Configuring the Printer Driver Settings Windows 98/Me Sharing Tab (See Note 1) 1. Not Shared/Shared As Select whether to display or share this printer with other computers. 2. Share Name Specify the name of the shared printer. The displayed name can be used as it is or a new name may be entered.
  • Page 37 Configuring the Printer Driver Settings Windows 98/Me Paper Tab 1. Paper size Select a document size. 2. Orientation Select the print orientation (Portrait/Landscape). 3. Paper control Controls printer outputs and groups pages. Select Collate if you wish each set of multiple copies collated when you print them. Otherwise, each page is printed in individual groups.
  • Page 38 Configuring the Printer Driver Settings Windows 98/Me button About... Displays version and copyright information for this printer driver. button Help Displays the help window for this printer driver. button Restore Defaults Sets the values of all options in the current dialog box to the default values specified in the PPD file.

  • Page 39: Graphics Tab

    Configuring the Printer Driver Settings Windows 98/Me Graphics Tab 1. Resolution Select the resolution you want for printing (300dpi/600dpi/1200dpi Enhanced). 2. Special Prints a negative image and/or mirror image of your document. Click these options to view an example. 3. Paper handling Specify the layout pattern for printing multiple documents on a single sheet of paper and whether page borders are used.

  • Page 40: Fonts Tab

    Configuring the Printer Driver Settings Windows 98/Me Fonts Tab 1. Substitute printer fonts for TrueType fonts when applicable Tells the driver to determine which PostScript fonts to substitute for TrueType fonts. Instead of sending all TrueType fonts to your printer, this option substitutes a PostScript printer font for the common TrueType fonts used in your document.
  • Page 41 Configuring the Printer Driver Settings Windows 98/Me Device Options Tab (See Note 1) 1. Available printer memory Specifies the amount of available printer memory. The driver uses this information when performing printing tasks, such as sending fonts from the computer to the printer. 2.
  • Page 42 Configuring the Printer Driver Settings Windows 98/Me • Staple Select the staple position. Available if the optional Finisher (DA-FS600, FS605, FS330 or FS355) is installed. Portrait (Top Left / Left / Top Right / Right) Portrait (Saddle Stitch) Landscape (Saddle Stitch) Landscape (Top Left / Top Right / Top) •...
  • Page 43 Configuring the Printer Driver Settings Windows 98/Me • Tray Switching Allow the paper to be fed continuously if the same size of paper is loaded in another paper tray (Auto Tray Switching). If not selected, the machine will stop if paper runs out in the chosen paper tray. 4.
  • Page 44 Configuring the Printer Driver Settings Windows 98/Me PostScript Tab 1. PostScript output format Specifies the format for the PostScript files. In general, use PostScript (Optimize For Speed) for printing a document. 2. PostScript header Specifies whether to send header information to the printer each time you print a document; this is an advanced feature to use only if you have experience working with headers.
  • Page 45 Configuring the Printer Driver Settings Windows 98/Me Watermarks Tab 1. Select a watermark Lists and displays the available watermark definitions. You can click an entry in the list to select it for editing or deleting. button displays the New Watermark dialog box, which lets you add a new watermark to the Select a Watermark list.

  • Page 46: Windows Nt 4.0 (Administrator Settings)

    Configuring the Printer Driver Settings Windows NT 4.0 (Administrator Settings) General Tab 1. Comment Enter comments to the properties, if any. If another user sets up this printer on his or her computer when sharing the printer, the comment specified here will also appear on that computer.
  • Page 47 Configuring the Printer Driver Settings Windows NT 4.0 (Administrator Settings) Ports Tab 1. Print to the following port(s) Displays a list of available ports for printing (Port), their status (Description) and printers that are connected to these ports (Printer). button Delete Port Add Port...
  • Page 48 Configuring the Printer Driver Settings Windows NT 4.0 (Administrator Settings) Scheduling Tab 1. Available Schedules when the printer is available for operation. Specify operating hours when From-To is selected. 2. Priority Sets printing priority. The slider allows the priority to be adjusted from 1 through 99. 3.
  • Page 49 Configuring the Printer Driver Settings Windows NT 4.0 (Administrator Settings) Sharing Tab 1. Not Shared/Shared Select whether to display or share this printer with other computers. 2. Share Name Specify the name of the shared printer. The displayed name can be used as it is or a new name may be entered.
  • Page 50 Configuring the Printer Driver Settings Windows NT 4.0 (Administrator Settings) Security Tab button Permissions Set printer access privileges. button Auditing Displays the users who have used this printer and how they used it. button Ownership Set the ownership of the printer. 1.
  • Page 51 Configuring the Printer Driver Settings Windows NT 4.0 (Administrator Settings) Device Settings Tab Specifies the following printer settings and options: • Form To Tray Assignment Specifies the paper size of each available tray. • Font Substitutuion Table Specifies which PostScript fonts to substitute for TrueType fonts. Instead of sending all TrueType fonts to your printer, this option substitutes a PostScript printer font for the common TrueType fonts used in your document.
  • Page 52 Configuring the Printer Driver Settings Windows NT 4.0 (Administrator Settings) • Wait timeout Specifies the maximum number of seconds that the printer will wait for the computer to send data before canceling the job. A value of zero means that the job is never canceled. If your printer is shared, do not specify a value of zero.

  • Page 53: Windows 2000/Xp (Administrator Settings)

    Configuring the Printer Driver Settings Windows 2000/XP (Administrator Settings) General Tab 1. Printer Name Name of the printer specified upon installation is displayed. 2. Location Specifies the printer location. 3. Comment Enter comments to the properties, if any. If another user sets up this printer on his or her computer when sharing the printer, the comment specified here will also appear on that computer.

  • Page 54: Sharing Tab

    Configuring the Printer Driver Settings Windows 2000/XP (Administrator Settings) Sharing Tab 1. Not shared/Shared as Select whether to display or share this printer with other computers. For sharing a printer, specify the share name of a printer to be shared. A name specified here appears when other users view the printer information on a network.
  • Page 55 Configuring the Printer Driver Settings Windows 2000/XP (Administrator Settings) Ports Tab 1. Print to the following port(s) Displays a list of available ports for printing (Port), their status (Description) and printers that are connected to these ports (Printer). button Delete Port Add Port...
  • Page 56 Configuring the Printer Driver Settings Windows 2000/XP (Administrator Settings) Advanced Tab 1. Always available/Available from Schedules when the printer is available for operation. Specify operating hours when From-To is selected. 2. Priority Sets printing priority. The slider allows the priority to be adjusted from 1 through 99. 3.
  • Page 57 Configuring the Printer Driver Settings Windows 2000/XP (Administrator Settings) 9. Enable advanced printing features Enables advanced printing features. Optional features of the printer (page ordering, booklet printing, numbering on sheets) are enabled. These features can be disabled if a problem occurs due to incompatibility.
  • Page 58 Configuring the Printer Driver Settings Windows 2000/XP (Administrator Settings) Security Tab Displays a list of users and groups to whom printer access is assigned to. A list of standard permissions for each group or user is displayed. Check the checkboxes for permitting or prohibiting access. Gray checkbox indicates the permission inheritance.
  • Page 59 Configuring the Printer Driver Settings Windows 2000/XP (Administrator Settings) Device Settings Tab Specifies the following printer settings and options: • Form To Tray Assignment Specifies the paper size of each available tray. • Font Substitutuion Table Specifies which PostScript fonts to substitute for TrueType fonts. Instead of sending all TrueType fonts to your printer, this option substitutes a PostScript printer font for the common TrueType fonts used in your document.
  • Page 60 Configuring the Printer Driver Settings Windows 2000/XP (Administrator Settings) • Wait timeout Specifies the maximum number of seconds that the printer will wait for the computer to send data before canceling the job. A value of zero means that the job is never canceled. If your printer is shared, do not specify a value of zero.

  • Page 61: Configuring The Printer Driver Settings (Macintosh)

    To change the printer settings, open the printer properties by performing the following steps. Select the File menu > Print. Select the Panasonic printer. In print window, you will see a number of titles in the pop-up menu. The appropriate operating system shows different titles in the window.

  • Page 62: Mac Os 8.6/9.X

    Configuring the Printer Driver Settings (Macintosh) Mac OS 8.6/9.x General menu 1. Copies Specify the number of copies to be printed. 2. Pages Specify the range of printing pages. 3. Paper Source Specify where the paper you want to use is located in the device. If you choose Auto Select, the printer driver will automatically select an appropriate tray according to the Paper Size selected.
  • Page 63 Configuring the Printer Driver Settings (Macintosh) Mac OS 8.6/9.x Background Printing menu 1. Print in Select Foreground or Background printing. Foreground printing ties-up your Macintosh while it prints the job. Printing is completed more quickly, and the document takes less disk space when preparing for printing. The Background selection causes your Macintosh to write your job to the hard disk before printing it.
  • Page 64 Configuring the Printer Driver Settings (Macintosh) Mac OS 8.6/9.x Cover Page menu NOTE: This feature is not available on your machine.
  • Page 65 Configuring the Printer Driver Settings (Macintosh) Mac OS 8.6/9.x Color Matching menu NOTE: This feature is not available on your machine.

  • Page 66: Layout Menu

    Configuring the Printer Driver Settings (Macintosh) Mac OS 8.6/9.x Layout menu 1. Pages per sheet Specify the number for printing multiple documents on a single sheet of paper. Select this option to view an example. 2. Layout direction Specify the layout direction for printing multiple documents on a single sheet of paper. Select this option to view an example.
  • Page 67 Configuring the Printer Driver Settings (Macintosh) Mac OS 8.6/9.x Error Handling menu 1. If there is a PostScript error Specifies how to send PostScript error information with every document that you print. 2. If the cassette is out of paper Specify what will happen if paper runs out in the chosen paper tray.
  • Page 68 Configuring the Printer Driver Settings (Macintosh) Mac OS 8.6/9.x PostScript Settings menu 1. Format Specifies the format for the PostScript files. In general, use PostScript job for printing a document. 2. PostScript Level Specifies the level for the PostScript. 3. Data Format Specifies the data format to the printer.
  • Page 69 Configuring the Printer Driver Settings (Macintosh) Mac OS 8.6/9.x Output menu 1. Collation Specify whether if you wish each set of multiple copies collated when you print them. Otherwise, each page is printed in individual groups. 2. Finisher Bin Specifies which output bin to use for your printed document. Some printer models have more than one output bin you can use for sorting your documents.
  • Page 70 Configuring the Printer Driver Settings (Macintosh) Mac OS 8.6/9.x Quality menu 1. Media Type Select the paper type. 2. Resolution Select the resolution you want for printing (300dpi/600dpi/1200dpi Enhanced).
  • Page 71 Configuring the Printer Driver Settings (Macintosh) Mac OS 8.6/9.x Printer Specific Options menu 1. Secure Select the Mailbox or Secure Mailbox if storing the print data into the mailbox of the machine. Available if the optional Hard Disk Drive Unit (DA-HD60) is installed. Note: The PS Driver Security Utility must be installed in order to use the user ID password.

  • Page 72: Mac Os X

    Configuring the Printer Driver Settings (Macintosh) Mac OS X With Macintosh OS X, such functions as Staple, Punch and Secure cannot be used because Print Center > Printers > Configure Printer... is grayed out and Device Options cannot be selected. For details, refer to Support on Apple’s website (http://www.info.apple.com/).
  • Page 73 Configuring the Printer Driver Settings (Macintosh) Mac OS X Copies & Pages menu 1. Copies Specify the number of copies to be printed. Select "Collated" if you wish each set of multiple copies collated when you print them. Otherwise, each page is printed in individual groups.
  • Page 74 Configuring the Printer Driver Settings (Macintosh) Mac OS X Layout menu 1. Pages per sheet Specify the number for printing multiple documents on a single sheet of paper. Select this option to view an example. 2. Layout direction Specify the layout direction for printing multiple documents on a single sheet of paper. Select this option to view an example.
  • Page 75 Configuring the Printer Driver Settings (Macintosh) Mac OS X Duplex menu Print on Both Sides / Binding Specify whether and how the printer should print the document on both sides of the paper.
  • Page 76 Configuring the Printer Driver Settings (Macintosh) Mac OS X Output Options menu Save as File / Format Select to save your document as a file. You can specify the file format. The document will not be send to the printer.
  • Page 77 Configuring the Printer Driver Settings (Macintosh) Mac OS X Paper Feed menu All pages from / First pages from Specify where the paper you want to use is located in the device. If you choose Auto Select, the printer driver will automatically select an appropriate tray according to the Paper Size selected.
  • Page 78 Configuring the Printer Driver Settings (Macintosh) Mac OS X Error Handling menu 1. PostScript Errors Specifies how to send PostScript error information with every document that you print. 2. Tray Switching Specify what will happen if paper runs out in the chosen paper tray.
  • Page 79 Configuring the Printer Driver Settings (Macintosh) Mac OS X Printer Features menu Output tab: 1. Finisher Bin Specifies which output bin to use for your printed document. Some printer models have more than one output bin you can use for sorting your documents. 2.
  • Page 80 Configuring the Printer Driver Settings (Macintosh) Mac OS X Quality tab: 1. Media Type Select the paper type. 2. Resolution Select the resolution you want for printing (300dpi/600dpi/1200dpi Enhanced).
  • Page 81 Configuring the Printer Driver Settings (Macintosh) Mac OS X Miscellaneous tab: 1. Secure Select the Mailbox or Secure Mailbox if storing the print data into the mailbox of the machine. Available if the optional Hard Disk Drive Unit (DA-HD60) is installed. Note: The PS Driver Security Utility must be installed in order to use the user ID password.
  • Page 82 Configuring the Printer Driver Settings (Macintosh) Mac OS X Summary menu Functions and settings of the printer are displayed.

  • Page 83: Configuring The Ps Driver Security Utility

    Configuring the PS Driver Security Utility Windows 98/Me/NT/2000/XP • User ID Input the user ID (8 numbers maximum) to be used for MailBox or Secure MailBox. • Password Input the password (4 numbers maximum) to be used for Secure MailBox. •...

  • Page 84: Mac Os 8.6/9.X/X

    Configuring the PS Driver Security Utility Mac OS 8.6/9.x/X If you are using Mac OS X, use the PS Driver Security Utility to change the setting before adding the printer. If you have already added the printer, delete it, change the setting using the PS Driver Security Utility, then add the printer.

  • Page 85: Printing From Windows Applications

    Printing from Windows Applications If the printer driver is installed properly and a printer is selected as the default printer in the printer setup, printing can be accomplished from any Windows application with simple operations. Printing from most Windows applications, select File menu > Print, the Print dialog box appears. •...

  • Page 86: Windows 98/Me

    Printing from Windows Applications Windows 98/Me Paper Tab Refer to "Configuring the Printer Driver Settings" for details on settings (See page 37).

  • Page 87: Windows Nt 4.0 (User Settings)

    Printing from Windows Applications Windows NT 4.0 (User Settings) Page Setup Tab 1. Paper Size Select a document size. 2. Paper source Specify where the paper you want to use is located in the device. If you choose Automatically Select, the printer driver will automatically select an appropriate tray according to the Paper Size selected.
  • Page 88 Printing from Windows Applications Windows NT 4.0 (User Settings) Advanced Tab Specifies advanced printer settings and options. Refer to "Windows NT 4.0 (Administrator Settings)" (See page 51).

  • Page 89: Windows 2000/Xp (User Settings)

    Printing from Windows Applications Windows 2000/XP (User Settings) Layout Tab 1. Orientation Select the print orientation (Portrait/Landscape/Rotated). (The Rotated output is the same as that of Landscape.) 2. Print on Both Sides Specify whether and how the printer should print the document on both sides of the paper. 3.
  • Page 90 Printing from Windows Applications Windows 2000/XP (User Settings) Paper/Quality Tab 1. Paper source Specify where the paper you want to use is located in the device. If you choose Automatically Select, the printer driver will automatically select an appropriate tray according to the Paper Size selected. 2.

  • Page 91: Printing From Macintosh Applications

    Printing from Macintosh Applications If the printer driver is installed properly, printing can be accomplished from any Macintosh application with simple operations. Printing from most Macintosh applications, select File menu > Print, the Print dialog box appears. • Printing After selecting the page range to be printed and the number of copies, click the button to start Print printing.

  • Page 92: Printing On Network

    Printing on Network For sharing a printer by connecting two computers via a crossover cable or using a hub, a connection among computers must be established. Establishing a connection among computers can be verified by displaying the connected computers in Network Neighborhood on the desktop.
  • Page 93 Printing on Network Remote (PC that uses another computer's printer) Click the Start button, select Settings, and then click Printers. Double-click Add Printer in the printers folder. Add Printer Wizard appears. Click the button. Next Select Network Printer. Click the button.

  • Page 94: Additional Information About The Printing System

    Windows, copy file c:\pm65\rsrc\UsEnglish\ppd4\. 1. Copy the printer’s PPD file to \pm65\rsrc\UsEnglish\ppd4\ on the hard disc on which Adobe PageMaker 6.5 is installed. 2. Select "Print" from the "File" menu. 3. Set both "Printer" and "PPD" to "Panasonic DP-6010PS".

  • Page 95: Restrictions

    • When printing from Windows NT, "JOB OWNER" remains blank at "JOB QUEUE", "MAIL BOX" and "SECURE MAIL BOX" on the printer. • When printing from Windows 2000, "FILE NAME" and "JOB NAME" are set to "Panasonic DP" at "JOB QUEUE", "MAIL BOX" and "SECURE MAIL BOX" on the printer.

  • Page 96: Troubleshooting

    Troubleshooting Troubleshooting Printing Operation Fails If the printing operation fails, check the following items first: • The connection cable (Parallel Printer Cable or Ethernet LAN Cable) is properly connected. • Power of the device is turned ON. • Paper is loaded properly in the device. •...

  • Page 97: Document Is Not Printed Correctly

    Troubleshooting Document is Not Printed Correctly Problem Solution Characters are not printed in the correct positions or the • Check and specify the paper size and orientation characters near the edges of the page are missing. settings in the printer driver to coincide with the application.

  • Page 98: Appendix

    Appendix Appendix Printing Area 0.1/2.5 0.1/2.5 0.1/2.5 0.1/2.5 Bottom (Unit: inches/mm)

  • Page 99: Font Table

    Appendix Font Table Symbol Set Albertus ‡ Albertus Italic ‡ Albertus Light ‡ AntiqueOlive Bold § AntiqueOlive Compact § AntiqueOlive Itallic § AntiqueOlive Roman § Apple Chancery ¤ Arial ‡ Arial Bold ‡ Arial Bold Italic ‡ Arial Italic ‡ ITC AvantGarde Gothic Book °...
  • Page 100 Appendix Font Table Symbol Set Eurostile ** Eurostile Bold ** Eurostile Bold Extended Two ** Eurostile Extended Two ** Geneva ¤ GillSans ‡ GillSans Bold ‡ GillSans Condensed Bold ‡ GillSans Bold Italic ‡ GillSans Condensed ‡ GillSans Extra Bold ‡ GillSans Italic ‡...
  • Page 101 Appendix Font Table Symbol Set LetterGothic Bold LetterGothic Bold Slanted LetterGothic Slanted ITC Lubalin Graph Book ° ITC Lubalin Graph Book Oblique ° ITC Lubalin Graph Demi ° ITC Lubalin Graph Demi Oblique ° Marigold ° ITC Mona Lisa Recut ° Monaco ¤...
  • Page 102 Appendix Font Table Symbol Set Univers Oblique † Univers Light † Univers Light Oblique † UniversCondensed † UniversCondensed Bold † UniversCondensed Bold Oblique † UniversCondensed Oblique † UniversExtended † UniversExtended Bold † UniversExtended Bold Oblique † UniversExtended Oblique † ˇ Wingdings ITC ZapfChancery Mediumltalic °...
  • Page 103 memo...
  • Page 104 PANASONIC MACHINE, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PANASONIC DOCUMENT IMAGING COMPANY ASSUMES NO RISK AND SHALL NOT BE SUBJECT TO LIABILITY FOR ANY DAMAGE, INCLUDING, BUT NOT LIMITED TO DIRECT, INDIRECT,...

This manual is also suitable for:

Dp-4510Dp-6010

Table of Contents