Panasonic DP-3510 Service Manual page 619

11.1.5.3.3. PCBs
1. Removing the LED PCB.
2. Removing the Photosensor PCB.
3. Removing the Punch Trash Box Full Detector PCB Unit.
Ver. 5.2
[2]
[1]
Fig. 5-076
[4]
[3]
[2]
[1]
Fig. 5-077
[3]
[2]
[1]
Fig. 5-078
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
(1) Remove the Punch Slide Unit Assembly.
(See Fig. 5-069.)
(2) Remove 1 Screw [1] and the LED PCB [2].
(1) Remove the Upper Cover. (See Fig. 5-066.)
(2) Remove 2 Screws [1], and remove the Sensor
Plate [2].
(3) Disconnect the Connector [2], and remove the
Photosensor PCB [4].
(1) Remove the Right Guide Assembly.
(See Fig. 5-065.)
(2) Remove 1 Screw [1], disconnect the Connector
[2], and remove the Punch Trash Box Full
Detector PCB Unit [3].
619
JAN 2006