Panasonic DP-3510 Service Manual page 186

Code
E3- 25 Drum Motor rotation
E3- 40 Copy Density Sensor output
adjustment
E3- 51 Corona Wire cleaning
E3- 60 Toner Waste collection
Ver. 5.2
E3: Development System Error
Function
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
1. Drum Drive Gear is defective.
2. Drum Drive Mechanism is defective.
3. Drum Unit is defective.
4. Drum Motor connector is disconnected.
5. Drum Motor is defective.
6. DRV PCB connector is disconnected.
7. DRV PCB is defective.
8. SPC PCB connector is disconnected.
9. SPC PCB is defective.
10. LVPS is defective.
1. Sensor connector is disconnected.
2. Sensor is defective.
3. SPC PCB connector is disconnected.
4. SPC PCB is defective.
1. Cleaner Home Position Sensor 1 connector is
disconnected.
2. Cleaner Home Position Sensor 1 is defective.
3. Cleaner Home Position Sensor 2 connector is
disconnected.
4. Cleaner Home Position Sensor 2 is defective.
5. Cleaner Motor Drive Mechanism is defective.
6. Corona Mechanism is defective.
7. Cleaner Motor connector is disconnected.
8. Cleaner Motor is defective.
9. DRV PCB connector is disconnected.
10. DRV PCB is defective.
11. SPC PCB connector is disconnected.
12. SPC PCB is defective.
13. LVPS is defective.
1. Toner Waste pipe is clogged up.
2. Toner Waste Mechanism is defective.
(Refer to Flow Chart below)
3. Lock Detect Sensor connector is disconnected.
4. Lock Detect Sensor is defective.
5. DRV PCB connector is disconnected.
6. DRV PCB is defective.
7. SPC PCB connector is disconnected.
8. SPC PCB is defective.
186
Check Points
JAN 2006