Installing The Network Scanner Module (Da-Ns180) For Dp1820P/1820E - Panasonic DP-1820P Service Manual

8.4.

Installing the Network Scanner Module (DA-NS180) for DP1820P/1820E

8.4.1. Contents
Qty.
1 Hardware Key
1 Key Assembly
1 Installation Instructions
Note:
1. The part number(s) may differ depending on the Destination.
2. Refer to the Parts List in the Parts Manual.
8.4.2. Installation
CAUTION!
Turn the Power Switch on the Right Side of the machine to the OFF position, and then
unplug the AC Power Cord before beginning installation. (During a Lightning Storm, to
prevent electrocution disconnect the Telephone Line Cable first before unplugging the
AC Power Cord, if the Fax Option is installed.)
Ver. 1.2
Description Part No.
-----
See Note
DZSM000822 This document
(1) Open the Left Cover.
(2) Remove 2 Silver Screws.
(3) Remove the Left Scanner Cover.
(4) Remove 2 Shoulder Silver Screws.
(5) Remove the Right Scanner Cover.
(6) Remove 2 Silver Screws.
(7) Slightly lift the Control Panel Assembly.
(8) Disconnect the Harness on the PNL1 PC Board
(CN220).
(9) Remove the Control Panel Assembly.
(10) Release 2 Latch Hooks.
333
DP-1520P/1820P/1820E
Remarks
NWS KEY
SEP 2004