Technical Reference; The Flash Key; Europe Type Supplementary Phone Services; Table 45 European Type Flash Key Commands - ZyXEL Communications MAX-206M1R series User Manual

Chapter 11 The Phone Screens

11.5 Technical Reference

The following section contains additional technical information about the WiMAX
Modem features described in this chapter.

11.5.1 The Flash Key

Flashing means to press the hook for a short period of time (a few hundred
milliseconds) before releasing it. On newer telephones, there should be a "flash"
key (button) that generates the signal electronically. If the flash key is not
available, you can tap (press and immediately release) the hook by hand to
achieve the same effect. However, using the flash key is preferred since the
timing is much more precise. The WiMAX Modem may interpret manual tapping as
hanging up if the duration is too long
You can invoke all the supplementary services by using the flash key.

11.5.2 Europe Type Supplementary Phone Services

This section describes how to use supplementary phone services with the Europe
Type Call Service Mode. Commands for supplementary services are listed in the
table below.
After pressing the flash key, if you do not issue the sub-command before the
default sub-command timeout (2 seconds) expires or issue an invalid sub-
command, the current operation will be aborted.

Table 45 European Type Flash Key Commands

COMMAND SUB-
Flash
Flash
Flash
Flash
Flash
Flash
European Call Hold allows you to put a call (A) on hold by pressing the flash key.
134
DESCRIPTION
COMMAND
Put a current call on hold to place a second call.
Switch back to the call (if there is no second call).
0 Drop the call presently on hold or reject an incoming call
which is waiting for answer.
1 Disconnect the current phone connection and answer the
incoming call or resume with caller presently on hold.
2 1. Switch back and forth between two calls.
2. Put a current call on hold to answer an incoming call.
3. Separate the current three-way conference call into
two individual calls (one is on-line, the other is on hold).
3 Create three-way conference connection.
*98# Transfer the call to another phone.
User's Guide