The Snmp Screen - ZyXEL Communications NWA-3160 User Manual

Chapter 16 Remote Management Screens

16.5 The SNMP Screen

Use this screen to have a manager station administrate your NWA over the
network. To change your NWA's SNMP settings, click REMOTE MGMT > SNMP.
The following screen displays.
Figure 119 Remote Management: SNMP
The following table describes the labels in this screen.
Table 56 Remote Management: SNMP
LABEL
SNMP Configuration
Get Community
Set Community
Community
Trap Destination
SNMP Version
190
DESCRIPTION
Enter the Get Community, which is the password for the incoming
Get and GetNext requests from the management station. The default
is public and allows all requests.
Enter the Set community, which is the password for incoming Set
requests from the management station. The default is public and
allows all requests.
Type the trap community, which is the password sent with each trap
to the SNMP manager. The default is public and allows all requests.
Type the IP address of the station to send your SNMP traps to.
Select the SNMP version for the NWA. The SNMP version on the NWA
must match the version on the SNMP manager. Choose SNMP version
1 (SNMPv1), SNMP version 2 (SNMPv2) or SNMP version 3
(SNMPv3).
NWA-3160 Series User's Guide