Advertisement
3. Click Driver Installation. A DSL Modem Setup Wizard screen displays.
Select your language from the scroll-down list box and click OK.
4. Click Accept to agree to the software license agreement.
5. If your ISP is not listed, click Customize and then Next.
6. Select the type of driver specified by your ISP and click Next.
7. Enter the communication settings specified by your ISP and click Next.
8. Verify the communication settings and click Next.
9. When the installation process is completed, select Yes, reboot the
computer now and click Close to restart the computer.
When you start Windows, the utility software is launched automatically and an
icon will be added to the system tray.
If the icon does not appear in your system tray, you can manually start the utility
by clicking Start, Programs, Prestige 610 ADSL PCI Modem and then
Configure. Refer to the User's Guide for more information.
Network Access Configuration
Go to the LAN – Configuring an Always-on Connection section for the LAN driver.
Go to the WAN – Configuring a Dial-Up Connection section for the WAN driver.
When your computer has restarted or the connection is established, you are ready
to access the Internet.
LAN – Configuring an Always-on Connection
For Windows 98/98 SE/Me
1. Click Start, Settings, Control Panel, Network.
2. Select Configuration, TCP/IP, Prestige 610 ADSL PCI Modem and
click Properties.
3. In the IP Address tab, if your ISP gives you a static (or fixed) IP address,
select Specify an IP address and enter the IP address and subnet mask.
4. Select the Gateway tab and enter your gateway information.
5. If DNS information is given, select the DNS Configuration tab and enter
the DNS information.
6. Click OK twice to exit the Network window.
7. Restart the computer when prompted.
4
Advertisement
