Clear; Configuration; Display - Canon imageRUNNER 2520 Series Service Manual

#CLEAR

Configuration

■
Group Item
TEL & USER DATA
SERVICE DATA
COUNTER
SOFT-CNT
TYPE
HST ACTIVITY
ACCOUNT
JAM
ERR
ALARM
ENVIROMENT
CARD
4
ERR E719
PWD
FILE SYSTEM
FORMAT USB MEMORY
LICENSE DRIVE Clears the drive for license file.
FMT-SD 512
1024
2048
CA-KEY
ERDS-DAT
DEPT_USER_CLEAR
SYSTEM_INFO_CLEAR
ENGIN ERRCLR
BKRAMCLR
TNRINST
EAM-DAT
4-44
All manuals and user guides at all-guides.com
Description
Clears all user-registered and -set areas of telephone
registration data and user data.
(Telephone registration refers to the registration of
codes on one-touch dialing, abbreviated dialing, and
group dialing.)
Clears theservice data. User data is not cleared.
Clears the maintenance counter, parts counter
and mode-specific counters. Initializes the counter
(numerator) in the system dump list.
Not used
Initializes user data and service data to suit specified
destination settings.
Initializes the activity report
Clears print histories.
Clears the jam history.
Clear the error (error code) history.
Clears the alarm history.
Initializes the enviroment log data.
Clears department management information held in
the controller before the card reader is demounted.
Clears card reader errors.
Clears the system administrator's password.
Not used
Format the USB memory. (This mode is used when
the USB memory error is damaged and E744 occurs.)
Format the 512MB SD card.
Format the 1204MB SD card.
Format the 2048MB SD card.
Initializes an installed CA certification. (Displayed only
after activation of the e-RDS function.)
The settings related to e-RDS are cleared to the
factory settings. (Displayed only after activation of the
e-RDS function.)
Turns off the department-based ID management and
user management functions.
Clears the system management identification number.
Clears the engine errors.
Clears the engine backup RAM.
Supplies toner from the toner cartridge to the
developing assembly.
Initializes the EAM Flash/SRAM data.
Group Item
ELA-DAT
ALL

#DISPLAY

■ Configuration
An error code is displayed when a service error has occurred. The E code is displayed in the
upper step, and the detail code is displayed the bottom step.
Group Item Description
DISPLAY ERR The E code and detail code of the current system error are displayed.
(Multiple codes can be displayed with the left and right buttons. )
<Display example>
SYSTEM ERROR
xxx: Eyyy-zzzz Example) 001:E602-1105
xxx: History number
yyy: E Code
zzzz: Detail code
JAM The current JAM code is displayed.
(Multiple JAM codes can be displayed with the left and right buttons.)
<Display example>
JAM ERROR
xxx:y-z-vvvv-wwww
xxx: History number
y: Description of position (3: Main unit (including the pickup assembly), 4:
ADF, 5: Finisher)
z: Cassette level (01: Manual feed tray, 1: Cassette 1, 2: Cassette 2, 3;
Cassette 3,4: Cassette 4, 7: Double-sided)
vvvv: JAM code
wwww: paper size
SPDTYPE Display of engine speed type on controller PCB
<Display example>
SPDTYPE (Line 1)
45cpm (Line 2)
Description
Initializes the ELA Flash/SRAM data.
Clears user and service data (except for some scan
parameters and print parameters), and the counter
setting/registration data in the system dump list,
except for the print count.
T-4-55 T-4-55
T-4-56 T-4-56