Turning Off The Host Machine; Installing The Voice Guidance Kit; A Point To Keep In Mind At Installation; Checking The Contents - Canon iR5055 Series Service Manual

Chapter 2

2.12.2 Turning Off the Host Machine

iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
Turning Off the Main Power of the Host Machine When turning off the main power, be sure to go through the following in strict sequence to protect the machine's
hard disk:
[1] Hold on the power switch on the control panel 3 sec or more.
[2] Operate on the touch panel according to the shut-down sequence indicated so that the main power switch may be turned off.
[3] Turn off the main power switch.
[4] Disconnect the power cable (for the power outlet).

2.13 Installing the Voice Guidance Kit

2.13.1 A point to keep in mind at installation

iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
- When installing the machine, see the Combination Table for Accessory Installation.
- In order to install this equipment, "Expansion Bus-D2" is required.

2.13.2 Checking the Contents

iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
<Voice Guidance Kit-B1>
[1]
[7]
[1] Speaker Unit (Upper)
[3] Cable (1300 mm)
[5] Cord Guide
(this machine requires 6 cord guides)
[7] Voice Board instruction plate
[9] Screw (binding; M3X6)
[11] Screw (binding; M4X40)
[13]* Screw (binding; M4X16)
[15]* Wire Saddle
* Not used for this machine
Advice Book, CD.
2-32
[2]
[8] [9] [10]
- Voice Guidance Kit Users Guide
- Voice Guidance Kit Users Guide CD
[3]
[4]
[11] [12]
F-2-127
1pc. [2] Speaker Unit (Lower)
1pc. [4]* Cable (1850 mm)
7pc. [6] Voice Board
1pc. [8]* Voice Board instruction plate
2pc. [10] Screw (binding; M4X6)
2pc. [12]* Screw (binding; M3X16)
1pc. [14] Ferrite Core
1pc.
[5]
[13] [14] [15]
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
0016-1691
0015-7208
0015-4782
[6]