Avaya S8500 Installing And Configuring page 93

Figure 11: S8500 Media Server, rear view
Table 6: Description of LEDs
Control/LED
1. LAN 1 transmit/receive
activity LED
2. LAN 1 speed 1 Gbps LED
3: LAN 2 speed 1 Gbps LED
4: LAN 2 transmit/receive
activity LED
The Avaya S8500 Media Server has five LEDs on the front and four LEDs in the back. The
following is a brief description of the function of each LED:
Ethernet 1 link (GREEN): Lights when the speed of the Ethernet LAN is 1000BASE-T. The
●
green LED will be off when the speed of the Ethernet LAN is 10/100BASE-T.
Ethernet 2 activity (GREEN): Blinks when there is an active 10/100/1000BASE-T
●
connection.
Ethernet 2 link (GREEN): Lights when the speed of the Ethernet LAN is 1000BASE-T. The
●
GREEN LED will be off when the speed of the Ethernet LAN is 10/100BASE-T.
There are no LEDs on the SAMP.
1 2
2
4 3
Description
This LED is on the Ethernet connector. When lit, it indicates that
there is activity between the media server and the network.
This LED is on the Ethernet connector. When lit, it indicates that the
Ethernet network speed is 1 Gbps. When off, it indicates that the
Ethernet network speed is 10 Mbps or 100 Mbps.
This LED is on the Ethernet connector. When lit, it indicates that the
Ethernet network speed is 1 Gbps. When off, it indicates that the
Ethernet network speed is 10 Mbps or 100 Mbps.
This LED is on the Ethernet connector. When lit, it indicates that
there is activity between the media server and the network.
LED indicators
h2ms85b KLC 101904
Issue 3.1 June 2005 93