Chapter 6: Completing the installation
This section covers the following tasks:
Verifying translations
●
●
●
●
●
●
●
●
●
Verifying translations
These steps verify translations.
1. Type list configuration all and press Enter to view all the administered circuit
packs in the system.
2. Type list ipsi and press Enter to verify the location of the IPSI circuit packs.
3. Check the administration status on the following items:
list station
●
list trunk-group
●
list hunt-group
●
Note:
Even though you set the date, time, and time zone through the Web interface on
Note:
the media server, you also must set the daylight savings time rules and locations
and verify the date and time through SAT commands.
administration
on page 79
79