Checking Led Activity On The Optional Dual Nic - Avaya S8500 Installing And Configuring

5. Select the Change Modem Setting and click Continue.
6. In the AT String field, type the initialization commands appropriate for your modem and
country of operation. Click Help for guidance on what to enter.
For example, to change the country code to Japan, type AT%T19,0,10.
7. Click Change.
The system responds with a message indicating a successfully added modem route.
8. Click Close Window.

Checking LED activity on the optional dual NIC

When the media server is in service, check the LEDs on each port of the dual network interface
card (NIC) to make sure there is a connection (left LED) and activity (right LED). For dual-NiC
LEDs see Figure 4: S8500 rear panel dual-NIC LEDs
Configuring the media server
on page 54.
Issue 3.1 June 2005 53