Connecting To The Ipsis - Avaya S8500 Installing And Configuring

Connecting to the IPSIs

Connecting to the IPSIs
For a guide when connecting the CAT5 cables to the media server, refer to
S8500 Media Server connectivity
IP Connect: Connect one end of the GREEN CAT5 straight-through cable to the IPSI adapter
on the back of media gateway in position A. The other end is connected to the next available
port on the customer's network. If not already connected, connect it.
Direct connect: Connect a crossconnect CAT5 or better cable from the IPSI adapter to the left
port (Eth2) on the dual NIC.
Figure 5: Avaya S8500 Media Server connectivity guide
Figure notes:
1. Eth0—to customer's network if
nondedicated control network.
(straight-through CAT5 cable)
2. Eth1—to services laptop (cross-connect
CAT5 cable)
66 Installing and Configuring the Avaya S8500 Media Server
guide.
2
1
1
2
1
2
3. Eth2—to port network if only one port
network (cross-connect CAT5 cable) or to
customer's network if dedicated control
network (straight-through CAT5 cable)
4. Eth3—unused
Figure 5: Avaya
4
h3msbl5a KLC 093004
3