Avaya S8500 Media Server Leds - Avaya S8500 Installing And Configuring

Avaya S8500 Media Server LEDs

LEDs on the Avaya S8500 Media Server are described in
Media Server.
Figure 12: Front of the Avaya S8500 Media Server
h2ms85bf KLC 091704
Table 7: Description of controls and LEDs
Control/LED
1: CD-ROM drive activity LED
2: CD eject button
3: Diskette drive activity LED
4: Diskette eject button
5: System error LED
6: System locator LED
7: Hard disk drive activity LED
8: Power on LED
9: Power control button
10: Reset button
11: USB connections for the
Compac Flash drive
1 2
Description
When lit, the CD-ROM drive is in use.
Press to release a CD from the CD-ROM drive.
When lit, the diskette drive is in use.
Press to release a diskette from the diskette drive.
When lit, a system error has occurred.
Use this blue LED to visually locate the media server if it is in a
location with numerous other media servers.
When flashing, a hard disk drive is in use.
When lit and not flashing, the media server is turned on.
When flashing, the media server is turned off and still connected to
the an ac power source.
When off, ac power is not present, or the power supply or the LED
itself has failed.
Press to turn the media server on and off manually.
Press to reset the media server and run the power-on self-test
(POST). You might have to use a pen or the end of a straightened
paper clip to press the button.
Figure 12: Front of the Avaya S8500
5
3 4 6
11 10
Issue 3.1 June 2005
LED indicators
7
8
9
95