Browser Settings; Connecting Directly To The Media Server - Avaya S8500 Installing And Configuring

Accessing the media server
5. On the General tab, select Use the following IP address. Enter the following:
IP address: 192.11.13.5
●
Subnet mask: 255.255.255.252
●
Make a note of any IP addresses or other entries that you have to clear. You may need to
restore them later to connect to another network.
6. Select Use the following DNS server addresses. The entries for Preferred DNS server
and Alternate DNS server should both be blank.
7. Click Advanced at the bottom of the dialog box to display the Advanced TCP/IP Settings
dialog box.
8. Click the DNS tab. Make sure no DNS server is administered (the address field should be
blank).
9. Click OK, OK, and Close to close all the windows.

Browser settings

Connecting directly to the media server

These steps change the browser settings.
Note:
Instructions are for Internet Explorer 6.0 only.
Note:
1. Click Tools > Internet Options.
2. Select the Connection tab.
3. In the LAN Settings box (lower righthand), click Advanced
4. In the Exceptions box after the last entry, type: 192.11.13.6
5. Click OK, then OK, then OK again to close all the dialog boxes.
108 Installing and Configuring the Avaya S8500 Media Server