Connecting to the IPSIs
Enabling control of IPSIs
Note:
Make sure the IPSIs have the same, current firmware.
Note:
These steps enable the IPSI circuit packs and allow them to control the port networks.
1. Type change system-parameters ipserver-interface and press Enter.
change system-parameters ipserver-interface
SERVER INFORMATION
Secondary Control Subnet Address:
OPTIONS
2. Make sure the IPSI Control of Port Networks: field is set to enabled.
3. Press Enter to effect the changes.
Verifying license status
These steps verify the license status.
1. Under Security, click License File and verify that the license mode is now normal.
76 Installing and Configuring the Avaya S8500 Media Server
IP SERVER INTERFACE (IPSI) SYSTEM PARAMETERS
IPSI Host Name Prefix:
Primary Control Subnet Address: 172. 22.
Switch Identifier: A
IPSI Control of Port Networks: enabled
0.
0
.
.
.
Page
1 of
1