Uninterruptible power supply LEDs
The Powerware uninterruptible power supply (UPS) front panel has the LEDs shown in
Figure 14: LEDs on Powerware 9125
Figure 14: LEDs on Powerware 9125 UPS
ledlups KLC 030102
Figure notes:
1. Normal mode indicator
2. Battery mode indicator
3. Bypass mode indicator
4. Test/Alarm reset button
After plugging in the UPS, all the LEDs flash briefly. After a self test, the Normal mode LED
flashes, indicating that the UPS is in Standby mode.
For more information on the LEDs, see the UPS user's guide that comes with the Powerware
UPS.
IPSI LEDs
The TN2312BP Internet Protocol Server Interface (IPSI) circuit pack LEDs are shown in
Figure 15: TN2312BP circuit pack faceplate
display to indicate whether its IP address is dynamic (shows media gateway location) or static
(shows I P). See
UPS.
Figure 16: LED display on the IPSI circuit pack—static address
1
2
3
4
5. Off button
6. On button
7. Bar graph indicators
8. Alarm indicators
on page 98). It also has a programmable LED
LED indicators
8
7
5
6
on page 99.
Issue 3.1 June 2005
97