Logins; Network Configuration - Avaya S8500 Installing And Configuring

Logins

Initial configuration and upgrades by an Avaya field tech or business partner requires a services
login, such as craft or dadmin. If an Avaya field tech, you can use a unique password assigned
to that customer's system.
After installing the Avaya authentication file, Avaya Communication Manager has a password
for the craft login that is unique to the customer's system and available when connected directly
to the media server. To bypass the ASG challenge and response, use this password the next
time you log in as craft. Every other means of craft access still require an ASG challenge and
response. The revised password is recorded by RFA and is obtained from ASG Conversant at
1-800-248-1234 or 1-720-444-5557.
Customer's can set up their own logins for accessing Avaya's media servers. See the Avaya
Communication Manager Basic Administration Quick Reference (03-300363) for specific
information. You must have superuser permission to create or change logins and passwords.
Note:
When assigning login IDs, do not start them with a number.
Note:

Network configuration

Note:
Write down the original settings in case you need to change them back.
Note:
A new network connection must be configured as follows:
Note:
These instructions are for Windows 2000/XP only.
Note:
1. On your computer desktop, right-click My Network Places and left-click Properties to
display the Network Connections window.
Windows 2000/XP should have automatically detected the Ethernet card in your system
and created a LAN connection for you. More than one connection may appear.
2. Right-click on the correct Local Area Connection and left-click Properties to display the
Local Area Connection Properties dialog box.
3. Select Internet Protocol (TCP/IP).
4. Click Properties to display the Internet Protocol (TCP/IP) Properties dialog box.
Logins
Issue 3.1 June 2005 107