Configuring the dual network interface card
This section describes the tasks required to configure the optional dual network interface card
(NIC) on the Avaya S8500 Media Server. The tasks include:
Configuring the network interface card
●
Configuring the network interface card
●
Testing connectivity to customer's network
●
Configuring the network interface card
To configure the NIC:
1. Under Server Configuration click Configure Server.
2. Click Continue through the review notices until you get to the Specify how you want to
use this Wizard page.
3. Select Configure Individual Services and click Continue.
4. Select Set Identities and click Continue.
5. Assign Ethernet port functions using the drop-down menus for the following fields:
Control Network A: [default: Ethernet 0]
●
Services Port: [default: Ethernet 1]
●
Corporate LAN: [default: Ethernet 0]. Set this field to Ethernet 2 to have the IPSI control
●
on a dedicated, separate Ethernet port.
Unused
●
on page 55
on page 55
on page 56
Issue 3.1 June 2005
55