Replacing The Microsd Card - Fujitsu PRIMERGY TX1320 M5 Upgrade And Maintenance Manual

▶ Install both microSD cards on the new Dual microSD 64GB Enterprise.
Proceed as described in the following:
Figure 226: Installing the microSD card
▶ With the label facing up, insert the microSD card into the microSD slot on
the controller (1) until it locks in place (2).
▶ Install the new Dual microSD 64GB Enterprise, see
microSD 64GB Enterprise" on page
Concluding steps
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
Software configuration
To install the ESXi to the Dual microSD 64GB Enterprise, see
configuration" on page
17.7.5

Replacing the microSD card

Upgrade and Repair Unit
(URU)
TX1320 M5
329.
54.
57.
60.
331.
Upgrade and Maintenance Manual
System board and components
"Installing the Dual
Hardware: 5 minutes
"Software
335