Expansion cards and backup units
Installing the slot cover
Figure 147: Installing the slot cover - example riser module 1
▶ Insert the slot cover. Make sure that the lug on the slot cover clicks into
place in the corresponding bracket (see circle).
Concluding steps
▶ Install the corresponding riser module, see
page
64.
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
▶ If applicable, update the system information of your server using the Chassis
ID Prom Tool, see
▶
"Resuming BitLocker functionality" on page
9.5.4
Replacing an expansion card
Upgrade and Repair Unit
(URU)
Tools:
tool-less
202
53.
60.
"Using the Chassis ID Prom Tool" on page
Upgrade and Maintenance Manual
"Installing a riser module" on
57.
86.
Hardware: 10 minutes
Software: 5 minutes
61.
91.
RX1330 M5