Removing The Front Usb3.0 Connector - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

Front panel

14.4.2.3 Removing the front USB3.0 connector

Figure 337: Removing the front USB3.0 connector
Ê Remove the two screws (1).
Ê Disconnect the front USB3.0 connector (2).
14.4.2.4 Installing the front panel module
Ê Install the front panel module, see section
module" on page
14.4.2.5 Concluding steps
"Installing the fan holder" on page 234
Ê
"Reassembling" on page 63
Ê
"Connecting the power cord" on page 67
Ê
"Switching on the server" on page 70
Ê
"Resuming BitLocker functionality" on page 112
Ê
458
438.
Upgrade and Maintenance Manual
"Replacing the front panel
RX2540 M4