9.4.2
Removing expansion cards
Upgrade and Repair Unit
(URU)
Phillips PH2 / (+) No. 2 screw driver (only for removing the slot
Tools:
bracket)
9.4.2.1
Preliminary steps
"Suspending BitLocker functionality" on page 67
Ê
"Shutting down the server" on page 49
Ê
"Disconnecting the power cord" on page 50
Ê
Ê If applicable, disconnect external cables from the expansion card.
"Getting access to the component" on page 51
Ê
9.4.2.2
Removing Oculink cables
Figure 95: Oculink cables - release latch
Ê Press on the release latch (see arrow) to unlock the connector.
Ê Disconnect the Oculink cables.
TX1320 M4
Upgrade and Maintenance Manual
Expansion cards and backup units
Hardware: 5 minutes
187