Concluding Steps; Removing Expansion Cards; Preliminary Steps - Fujitsu PRIMERGY TX1310 M3 Upgrade And Maintenance Manual

Expansion cards and backup units
9.3.1.4

Concluding steps

"Reassembling" on page 51
Ê
Ê If applicable, connect external cables to the expansion card.
"Connecting the power cord" on page 56
Ê
"Switching on the server" on page 57
Ê
Ê If applicable, "Enabling Option ROM scan" on page 65
"Resuming BitLocker functionality" on page 70
Ê
Ê If applicable, "After replacing/upgrading LAN controllers" on page 73
9.3.2

Removing expansion cards

Upgrade and Repair Unit
(URU)
Tools: Only for removing slot brackets:
– Phillips PH2 / (+) No. 2 screw driver
– Hexagon nut 5 mm (for hexagon bolt)
9.3.2.1

Preliminary steps

"Suspending BitLocker functionality" on page 61
Ê
"Shutting down the server" on page 44
Ê
"Disconnecting the power cord" on page 45
Ê
Ê If applicable, disconnect all external cables from the expansion card.
"Getting access to the component" on page 46
Ê
116 Upgrade and Maintenance Manual
Hardware: 5 minutes
TX1310 M3