Machining Of Flywheel - Daewoo KORANDO Service Manual

MACHINING OF FLYWHEEL

1 Flywheel
Machining of Flywheel
Notice
Flywheels which have scorch marks, scoring or cracks in
the clutch surface should be machined by grinding or
precision-turning. If the scores or cracks are severe than
permissible specifications, replace the flywheel.
Distance 'a'
Distance 'b'
Max. axial runout
When machining the clutch surface 'A', the mounting
surface (B) for the clutch pressure plate should also be
machined in accordance with 'A' to keep the distance 'a'.
Do not machine under 'b' value.
When machining, fix the flywheel exactly not to exceed the
standard runout.
19.3 - 19.5 mm
16.6 mm
New
15.6 mm
Repair up to
0.05 mm
OM600 ENGINE MECHANICAL 1B3-97
OM662LA OM661LA