Daewoo KORANDO Service Manual page 331

1B3-30 OM600 ENGINE MECHANICAL
Tools Required
603 589 00 09 00 Serration Wrench
667 589 03 63 00 Sliding Hammer
Removal & Installation Procedure
1. Using the serration wrench (4), remove the threaded ring
(1).
2. Install the sliding hammer into the prechamber.
3. Remove the perchamber (2).
Notice
After removing the prechamber, cover over the bores with
clean rag.
4. Inspect the prechamber.
Notice
If the prechamber seats in the cylinder head are leaking or
if the prechambers are replaced, the sealing surfaces in
the cylinder head must be remachined.
Serration Wrench 603 589 00 09 00
Sliding Hammer 667 589 03 63 00