Daewoo KORANDO Service Manual page 158

Tools Required
615 589 01 33 00 Puller
Removal & Installation Procedure
1. Put the assembly mark at the crankshaft sprocket (4) and
the timing chain (10) with the paint (arrow).
Installation Notice
Align the assembly marks on cranshaft sprocket and timing
chain. Also, align the assembly marks on camshaft sprocket
and timing chain when installing.
2. Unscrew the bolt (6) and remove the oil pump sprocket (7)
from the oil pump.
Installation Notice
Tightening Torque
3. Remove the oil pump roller chain (9).
4. Remove the oil pump chain tensioner (1), oil pump chain
bushing (2), and the oil pump chain spring (3).
5. Remove the crankshaft sprocket (4) using the puller (04,
special tool).
Notice
Make sure not to lose the crankshaft pulley key(5) when
removing.
Install the crankshaft sprocket(4) after warming it up.
6. Installation should follow the removal procedure in the
reverse order.
29 - 35 Nm
Puller (04) 615 589 01 33 00
M162 ENGINE MECHANICAL 1B1-83