Table of Contents
Advertisement
Removal & Installation Procedure
1. Remove the intake air duct.
Installation Notice
Tightening Torque
2. Remove the ignition cable cover.
Installation Notice
Tightening Torque
Notice
Unscrew the seven (M6 x 60) bolts and remove the ignition
cable cover.
3. Remove the spark plug connector and ignition cable.
4. Unscrew all the bolts (2,3) and remove the head cover and
the gasket.
Installation Notice
Tightening Torque
Notice
Replace the gasket with a new one if necessary.
5. Installation should follow the removal procedure in the
reverse order.
6. Check for oil leaks by operating the engine.
8.4 ± 0.65 Nm
9 - 10 Nm
22.5 - 27.5 Nm
M162 ENGINE MECHANICAL 1B1-31
Advertisement
Chapters
Table of Contents
