Daewoo KORANDO Service Manual page 131

1B1-56 M162 ENGINE MECHANICAL
7. Remove the camshaft sprocket (13) and adjust piston (14),
and remove the flange shaft (16) from the intake camshaft
(22) after removing the bolt (15).
Installation Notice
Tightening Torque
The sprocket bolt is designed to be used only once, so
always replace with new one.
8. Installation should follow the removal procedure in the
reverse order.
9. Adjust the camshaft timing.
1st step 18 - 22 Nm
2nd step 90° ± 5°