Daewoo KORANDO Service Manual page 251

1B2-62 M161 ENGINE MECHANICAL
Removal & Installation Procedure
1. Turn the crankshaft and position the No.1 cylinder piston at
ATDC 20°.
Notice
Turn the crankshaft in the direction of engine rotation.
2. Remove the cylinder head front cover.
3. Put the alignment marks (arrows) on the camshaft sprocket
and the timing chain.
4. Insert the insert pin into the No.1 and no.6 bearing cap hole
on camshaft to secure intake and exhaust camshaft.
5. Remove the chain tensioner.
6. Unscrew the exhaust sprocket bolt and remove the exhaust
camshaft sprocket.
Installation Notice
Tightening Torque
Notice
The flange bolt is designed to be used only once, so always
replace with new one.
1st step 20 Nm
2nd step 90°