Daewoo KORANDO Service Manual page 270

6. Remove the outer plate (7) with the screw driver and
remove the link (5).
7. Connect the new timing chain (2) to the used timing chain
(3) with the link (5), center plate (6, thickness 1.6mm),
and the outer plate (7).
8. Rotate the crankshaft in the direction if engine revolution
by pressing the new timing chain against the exhaust
camshaft sprocket to prevent it to be tangled.
Notice
Be sure to remove the wedge before cranking the engine.
9. Take out the used timing chain out from the chain housing.
10. Connect both separators of the new timing chain with the
link (5) and the center plate (6).
11. Install the jaw (a) and the thrust piece (b) to the assembly
tool as shown in the figures.
M161 ENGINE MECHANICAL 1B2-81