Daewoo KORANDO Service Manual page 842

Removal & Installation Procedure
1. Remove the shock absorber.
Installation Notice
Distance between the nut end
Upper
and the screw end
Tightening Torque
Lower
2. Remove the fulcrum pin mounting bolts and nuts and remove
the upper arm assembly.
Notice
Be careful not to damage or lose the adjusting shims.
Installation Notice
Tightening Torque
3. Remove the lower arm mounting bolts (2).
Installation Notice
Tightening Torque
4. Pull out the cotter pin from the lower arm ball end assembly
and remove lower arm after loosening the slotted nut.
Installation Notice
Tightening Torque
Notice
Replace the cotter pin with new one.
5. Installation should follow the removal precedure in the
reverse order.
6 - 9 mm
60 - 80 Nm
120 - 140 Nm
150 - 180 Nm
120 - 180 Nm
FRONT SUSPENSION 2C-9