Bolt (M6 X 65, 8 Pieces) - Daewoo KORANDO Service Manual

Removal & Installation Procedure
1. Unscrew the stretch bolt.
Installation Notice
Tightening Torque
Replace the bolt when the stretch side diameter (d) of
the flywheel mounting bolt is less than 8.0mm.
For the stretch bolt tightening, keep the socket wrench
and Tommy-bar to be 90° and tighten as specified.
2. Remove the flywheel for manual transmission vehicles, or
the driven plate (3), and plate (2) for Auto. transmission
vehicle.
3. Installation should follow the removal procedure in the
reverse order.
Sectional View
1st step 45+5 Nm
2nd step 90° + 10°
M162 ENGINE MECHANICAL 1B1-53
1 Oil Pan
2 Cover
3 Crankshaft Front Seal
4 Flywheel MTG Bolt
5 Crankshaft
6 Dowel Pin
7 Plate
8 TGCC
9 Bolt
10 Front Drive Plate
11 Rear Drive Plate
12 Rivet
13 Segment
14 Ring Gear