Daewoo KORANDO Service Manual page 777

1F3-50 OM600 ENGINE CONTROLS
5. Coat the new seal (23) with engine oil and install it.
6. Insert the fuel injection pump (25) and tighten the bolts
(22).
Tightening Torque
7. Remove the locking screw (32).
8. Tighten the bolt(12).
Tightening Torque
9. Insert the washer (21) and tighten the bolts (20) and then
remove the assembly cage (29).
Tightening Torque
10. Connect the fuel pipes
Return Line
Fuel Injection Line
Fuel feed Line
Suction and Pressure Line
Notice
Replace the seal.
23 Nm
23 Nm
46 Nm
46 Nm
18 Nm
13 Nm
13 Nm
Box Wrench Insert 000 589 77 03 00