Maintenance And Repair; Wheels And Tires - Daewoo KORANDO Service Manual

MAINTENANCE AND REPAIR

ON-VEHICLE SERVICE

WHEELS AND TIRES

Removal & Installation Procedure
1. Inspection of tire
Check tread area for tread surface, crack, damage by nail
in or stones. Replace or repair if necessary.
2. Wear limit.
Limit
Replace the tire if tread-wear indicator of the tread
grooves appears where marked 'D'.
The wear limit of snow tire is the same as normal tire
(1.6mm) and indicator location is marked '¯'.
3. Runout measurement.
Excessive runout of tires and wheels can cause the
abnormal wear of tire. Using a dial indicator, measure
wheel and tire runout.
Measure radial runout at the rim flange and center of
the tire tread area.
Standard
Measure lateral runout at the tire bead area of the wheel
and tire sidewall.
Standard
Notice
If runout is excessive, replace the tire or wheel.
1.6mm
2.66mm
2.03mm
TIRES AND WHEELS 2E-5