Daewoo KORANDO Service Manual page 759

1F3-32 OM600 ENGINE CONTROLS
4. Position the no.1 cylinder at ATDC 15°.
Notice
Do not rotate the engine with camshaft sprocket bolt or
opposite direction of the engine rotation.
5. Remove the plug (6) and seal (5) from the fuel injection
pump and collect oil in a suitable vessel.
Installation Notice
Tightening Torque
Notice
Replace the seal.
6. Install the locking screw (18) into the injection pump.
Notice
Before tightening the bolts for the injection timing device
and the camshaft sprocket, always remove the locking screw
from the injection pump and reinstall the plug.
7. Place alignment marks (arrow) on the timing chain (12) and
camshaft sprocket (15).
30 Nm
Locking Screw 601 589 05 21 00