Crankcase Guide Rail - Daewoo KORANDO Service Manual

CRANKCASE GUIDE RAIL

Preceding Work : Removal of timing gear case cover
Removal & Installation Procedure
1. Put the assembly mark at the camshaft sprocket and the
timing chain with the paint (arrow).
2. Remove the exhaust camshaft sprocket.
3. Remove the guide rail (1) from the guide rail pin (3).
Notice
Replace the plastic guide (2) if damaged.
Connect the plastic guide (2) and the guide rail (1) by
aligning them accurately when installing.
4. Installation should follow the removal procedure in the
reverse order.
5. Check the camshaft timing position.
M162 ENGINE MECHANICAL 1B1-81
1 Guide Rail
2 Plastic Guide
3 Guide Rail Pin
4 Tensioning Rail