Daewoo KORANDO Service Manual page 353

1B3-52 OM600 ENGINE MECHANICAL
Assembly Procedure
1. Replace the cylinder head gasket.
2. Install the cylinder head onto the crankcase.
Notice
Align the cylinder head holes with the guide pins.
3. Measure the length(L) of cylinder head bolts.
Notice
If the max. length is exceeded, replace the bolts.
4. Coat the head contact surface of bolts and thread with oil
and insert them as shown.
- Cylinder head bolts arrangement
Bore
1 ........................................... M10
2 ........................................... M10
3 ........................................... M10
4 ........................................... M 8
5 ........................................... M 8
×
80
×
102
×
115
×
50
×
80
Length(L)
Thread Dia.
when new
M10 80mm
M10 102mm
M10 115mm
OM662LA
Max. Limit(L)
82mm
104mm
117mm