Daewoo KORANDO Service Manual page 806

1G3-6 OM600 ENGINE INTAKE & EXHAUST
Removal & Installation Procedure
1. Remove the bolt from the exhaust manifold and then remove
the front exhaust pipe.
Installation Notice
Tightening Torque
Notice
When tightening the nut(3), maintain the clearance between
exhaust manifold(1) and front exhaust pipe.
2. Remove the nut from the front of center muffler and then
remove the front exhaust pipe.
Installation Notice
Tightening Torque
3. Remove the nut from the rear of center muffler and then
remove the tail muffler.
Installation Notice
Tightening Torque
4. Remove the muffler mounting hanger from the rubber pad
and remove the center muffler and tail muffler.
Notice
Check the gasket, if necessary, replace the new one.
5. Installation should follow the removal procedure in the
reverse order.
15 - 18 Nm
28 - 47 Nm
28 - 47 Nm