Daewoo KORANDO Service Manual page 776

Installation Procedure
1. Remove the screw plug (27) and seal (26) and collect oil in
a vessel.
2. Insert flange (31) onto the injection pump camshaft and
turn until the cam of the governor is visible in the hole.
3. Tighten the locking screw.
4. Ensure that the no.1 cylinder is positioned at ATDC 15°.
Flange 601 589 00 08 00
Locking Screw 601 589 05 21 00
OM600 ENGINE CONTROLS 1F3-49