Exhaust Manifold - Daewoo KORANDO Service Manual

EXHAUST MANIFOLD

1 Oxygen Sensor .............................. 49.5-60.5 Nm
2 Bolt (4 pieces) ........................................ 9-11 Nm
3 Upper Cover
4 Nut (11 pieces)............................... 31.5-38.5 Nm
Removal & Installation Procedure
1. Remove the oxygen sensor if necessary.
Installation Notice
Tightening Torque
2. Unscrew the bolt (2) and remove the exhaust manifold upper
cover (3).
3. Unscrew the flange bolt (6) of front exhaust pipe and
separate the front exhaust pipe.
Installation Notice
Tightening Torque
Notice
Check the exhaust pipe mounting nut, and replace it with
new one if necessary.
M161 ENGINE INTAKE & EXHAUST 1G2-9
5 Exhaust Manifold
6 Flange Bolt & Exhaust Pipe
7 Gasket ................................................... Replace
49.5 - 60.5 Nm
30 Nm
Mounting Nut ............................................ 30 Nm