Daewoo KORANDO Service Manual page 871

Removal & Installation Procedure
1. Be careful not to change the valve when connecting the
check valve and each hose.
2. Adjust the clearance between the retainer ring (5) and
locking hub (7) using the shim(6).
Normal
Notice
Shim thickness : 0.1, 0.2, 0.3, 0.5, 1.0 mm
3. Tighten the auto locking hub cap bolt to the specified torque
and order.
Tightening Torque
Max. 0.2 mm
50 - 60 Nm
FRONT DRIVE AXLE 3A-7