DIAGNOSIS TEST
Special Tool Requirements : Scanner
1 Diagnosis Connector
2 Fuse Box
1. Position the ignition switch to 'OFF'.
2. Connect Scanner harness connector to the engine
compartment diagnosis socket.
3. Turn the ignition switch to 'ON' position.
4. Select "Elctronic control vehicle diagnosis" from function
selection display and press "Enter".
5. Select "Korando ('98 model year)" from vehicle model
selection display and press 'Enter'.
6. Select "Elctronic suspension system (ECS)" from control
system selection display and press 'Enter'.
7. Select "Self-diagnosis" from diagnosis item selection display.
Notice
Check sensor value output display, if necessary.
8. Determine the fault code and check defective component.
Notice
Refer to self-diagnosis list.
SELF DIAGNOSIS TEST
SUSPENSION DIAGNOSIS 2A-11
3 Solenoid Valve