Daewoo KORANDO Service Manual page 290

Removal & Installation Procedure
1. Unscrew the bolt (6) from the oil pump drive sprocket and
separate the oil pump drive chain.
Installation Notice
Tightening Torque
2. Unscrew the bolts (4,5) and remove the oil strainer assembly
(3).
Installation Notice
Tightening Torque
Insert the steel gasket into the oil pump and bolt (4) mounting
surface.
3. Unscrew the six bolts (11) and remove the haffle plate.
Installation Notice
Tightening Torque
4. Unscrew the three bolt (1) and remove the oil pump.
Installation Notice
Tightening Torque
29 - 35 Nm
Bolt (4) 9 - 11 Nm
Bolt (5) 9 - 11 Nm
9 - 11 Nm
22.5 - 27.5 Nm
M161 ENGINE MECHANICAL 1B2-101