Shape - KEP MMI-1500 Installation & Operation Manual

8.3 Shape

Refer to Library Operations section "Selecting a Shape"
8.3.1 Placing a Shape
1. Click on the Shape tool
Shape Object dialog. Fill in the fields as indicated.
2. Click on the Shape library .... button and select a
shape from a Shape library.
3. Use the State buttons and dropdown to view the
states of the shape before placement.
4. Click OK to place the shape.
8.4 Bitmap
Refer to Library Operations section "Selecting a Bitmap"
8.4.1 Placing a Bitmap
1. Click on the Bitmap tool
Bitmap dialog. Fill in the fields as indicated.
2. Click on the Bitmap library.... button and select a
bitmap from a Bitmap library.
Note: Once a bitmap is selected, the Statistics fields
shows information about the bitmap. Height and
Width are in pixels. Size is the uncompressed size of
the bitmap.
Note: The bitmap image in the display box may be
distorted to fit and does not depict actual window
appearance.
3. Use the State dropdown to view the states of the bitmap before placement.
4. Click OK to place the text.
to display the Create
to display the Create
87