Section 1: Installation And Startup Guide - KEP MMI-1500 Installation & Operation Manual

Section 1: Installation and Startup Guide

1.0 Getting Started
1.1 The MMI-Touchscreen Series
Purpose of the MMI Series
These are small touch screen interfaces for controllers. They are used to display pictorial information, data
and messages. They are preloaded with a users custom designed project via a Personal Computer. Touch
screen areas may be programmed to modify internal or controller data.
Equipment
Checklist
An MMI system should include:
An MMI Series base unit
An interface cable to the controller
A personal computer with EasyBuilder programming
software installed.
A special PC to MMI programming cable is required
A 24VDC power supply
Designed Use
Provides a convenient way for a machine operator to:
• View machine status and parameters.
• Change machine status or applicable operating parameters of the machine.
• Maintain the running of the machine.
It also gives enhanced capabilities to the machine through:
• Printer output
• Direct touch screen interface
• Visually displayed prompts
MMI-730T
MMI-750T
Older Models
MMI-720
MMI-850
MMI-1500M
Refer Section 5 for available cables or
to make one using the cable diagrams
Installation CD provided with each unit.
Software is also available from the KEP
website. (www.kep.com)
MT5_PC cable ships with each unit.
User Provided
1
MMI-850T
MMI-1500T
MMI-750
MMI-1050
MMI-1500S