Hard Copy (Print Function) - KEP MMI-1500 Installation & Operation Manual

13.7.2 Hard Copy (Print Function)

Print functions facilitate the printing of screen data. Data is sent out as a graphic
through the parallel printer port.
Note: MMI-720 and MMI-750 models do
not have print capabilities.
Use the Attributes.... button to select the
desired print action.
Selection
Print Text & Meter & Trend
Print Text & Meter & Trend & All
Shape but not including pattern
Print Text & Meter & Trend & Bitmap
Print Text & Meter & Trend & Bitmap
& All Shape but not including pattern
Print Text & Meter & Trend & Bitmap
& All Shape
Form Feed
Note: Actual printer setup is done in the System Parameter, General tab. If no printer is selected the key has no effect.
13.7.3 Change Window
If the function key is set as "Change Window",
when the touch area is pressed (activated), the
current window display terminates and changes to
the window designated by "Window No.".
Window 10
Press Change Window Function key Button (in
this example labeled MENU)
Note: Be sure to select a valid window number. Project does not compile if Window No. is not defined.
Print action
Prints bit and numerical data parts along with drawn objects and text placed on
the display.
Prints the outline of bit and numerical data parts along with drawn objects, text
and shapes placed on the display.
Prints bit and numerical data parts along with drawn objects, text and bitmaps
placed on the display.
Prints the outline of bit and numerical data parts along with drawn objects, text,
bitmaps and shapes placed on the display.
Prints bit and numerical data parts along with drawn objects, text, bitmaps and
shapes placed on the display.
Prints a Form Feed command.
136
Window 100
'Jump to' Window 100